Mission Statement
To provide our customers with the highest quality products on time and affordably. We represent one of the largest manufacturers and exporters of scaffolding clamps in China. All scaffolding clamps / couplers are made as per BS1139(198) and EN74/EN74B.
All test certificates are available upon request.
scaffold clamps, clamps, ladders and scaffold, scaffold rental, scaffold plank, scaffold towers, scaffold frame, scaffold sales, scaffold manufacturer, construction scaffold, rolling scaffold, scaffold system, american ladders and
scaffold, masonry scaffold, upright scaffold, scaffold supply, suspended scaffold, scaffold industry association, building scaffold, drywall scaffold, painting scaffold, scaffold bracket, aluminum scaffold plank
Pig Ears
Single Coupler
Product Code: CUI1201
Golden Color Galvanized - Single unit design, used for connecting putlogs or transoms to ledger tubes, and for securing guard rails to standards. Approx. Weight 1.4 lbs.
SLEEVE COUPLER
Product Code: CUI1011
48.3mm Tubes, with 22mm nuts - A fitting design (using specially heated pressed steel) for external joining of two tubes end to end. Recommended for use on ledger and bracing members. Approx. Weight 2.7 lbs.
|
Scaffolding Clamps
Scaffold Couplers
Double/Right Angle Coupler
Product Code: CUI1401
48.3mmx48.3mm Galvanized, with 22mm nuts - One piece design, connects Horizontal Tubes to Vertical Tubes at 90 degrees. Used in every position where the tubes it secures comes under load. Approx. Weight 3.3 lbs.
Swivel Coupler
Product Code: CUI1402
48.3mmx48.3mm Galvanized, with 22mm nuts - This is a Single unit design, principally used for bracing and allowing tubes to be connected at any angle.
Approx. Weight 4.2 lbs.
Joint Pin (Internal)
Product Code: CUI1016
Golden Color, with 22mm nuts - Designed for joining tubes end to end. It is an internal expanding type, operating against the inner walls of the tubes. Approx. Weight 4.7 lbs.
Scaffold Screw Jacks
Product Code: CUI1411 (HOLLOW)
34.5X600mm, White Cold Galvanized - A single unit designed to level scaffold, platforms. Approx. Weight 11 lbs.
|
Swivel Gravlock
Product Code: CUI1027
48.3mm Galvanized, with 22mm nuts - Design to connect scaffold tube directly to steel beam at any angle. Must always be used in pairs. Approx. Weight 3.5 lbs
Fixed Beam Clamp
Product Code: CUI1023
48.3mm Galvanized, with 22mm nuts - Designed to connect scaffold tube directly to steel beam (up to 1 3/4" thick) Must always be used in pairs.
Approx. Weight 3.2 lbs.
Side By Side
Product Code: CUI1420
42mmx42mm Galvanized, with 22mm nuts - A fitting to lap two tubes in parallel, the bolt fixing firmly securing the tubes together in direct contact. Approx. Weight 1.4 lbs.
Minge Coupler
Product Code: CUI0165
48.3mm Tubes, with 22mm nuts - Use to connect top bearers on platform to leave top of tube flush for Timber joists. Can also used to connect timber to scaffolding. Approx. Weight 1.5 lbs.
Scaffold Screw Jacks
Product Code: CUI4014 (Solid)
34.5X600mm, White Cold Galvanized A single unit designed to level scaffold, platforms. Approx. Weight 14 lbs.
|